 |
|
|
| Anaerobic Adhesive |
ZY series of anaerobic adhesives are composed of liquid macromolecular materials, researched and developed by Zhejiang Provincial Electromechanical Design&Research Institute. The products have passed ministerial appraisal and were awarded as excellent new product prize by State Economic&Trade Commission, second prize and third prize on advances in science and technology by State Electromechanical Department, and second prize of scientific and technological achievement popularization by Zhejiang provincial government.
Features: not to solidify on contacting with air, and solidify at the normal temperature when being poured into seam and insulated from air, then bring firm adhesion and excellent vibration resistance and sealing property. After solidifying, they can't be corroded by other media such as oil, salt water, organic solvents, etc.
Using ZY series of anaerobic adhesive is convenient,and can decrease the parts, reduce the cost, eradicate the "three leakage" and improve the quality. Therefore, clients will feel satisfactory with their property, efficiency and economy. |
|
|
Categary |
Product name |
|
Feature and typical uses |
| Anaerobic Adhesive |
ZY-801
green |
 |
low viscosity, high strength. Used in transition, shrink or gap fit.
Typical Uses: the high-strength bonding and adhering between mould and socket joint, the bonding between rotor of micro-electric machinery and axes. |
| ZY-802
red |
 |
medium strength.
Typical Uses: the ordinary-strength bonding and adhering of bearing, axle sleeve, the blockage and sealing of over-loading fastening, the bonding and fixation of crystal, etc. |
| ZY-803
blue |
 |
low strength,easy to disassemble.
Typical Uses: fasten fireware, process fixation and sealing, etc. |
|
ZY-S1
little
brown |
 |
low viscosity, medium strength, high penetrability, fast solidifying speed. Used in sealing welding seam, casting sand hole and other micropores.
Typical Uses: penetration sealing all kinds of multiaperture parts such as a variety of welding seams of metal castings, micropores and powder metallurgical products, etc. |
| ZY-814
yellow |
 |
high viscosity, instant sealing property.
Typical Uses: sealing pipes and flange plane, substituting shim. |
|
ZY-953
nigger-brown |
|
high viscosity, high strength.
Typical Uses: bonding the alnico of alnico electric machinery with rotor and stator, bonding bearing, lining, gear, rotor belled beaded parts. |
|
ZY-900
transparent yellow (Green or Blue) |
 |
ordinary type, medium strength, medium viscosity.
Typical Uses: the fastening and sealing of screw thread. |
|
787,788 |
|
special promotor of anaerobic adhesive, used to increase the filling gap, improve the solidifying speed and promote the low-temperature solidifying. |
|
Properties and Packing
|
Brand No. |
801 |
802 |
803 |
S1 |
814 |
953 |
900 |
|
Color |
blue |
red |
blue |
light brown |
yellow |
nigger-brown |
transparent yellow (green or blue) |
|
viscosity(mPa.s) |
70-90 |
300-400 |
800-900 |
10-20 |
50000-80000 |
1500-3000 |
1000-8000
(adjustable) |
|
Shear Strength(Mpa) |
20-25 |
18-22 |
|
|
|
shear resistance 13 |
|
|
tensile resistance 19 |
|
Torque Strength(N.m) |
collapsing |
36-40 |
18-24 |
4-10 |
18-22 |
|
30-35 |
18-25 |
|
drawing out |
30-50 |
30-40 |
2-15 |
15-30 |
|
40-50 |
25-35 |
|
Optimal Gap(mm) |
0.005-0.02 |
0.005-0.03 |
|
<0.2 |
|
<0.2 |
0.05 |
|
Solidifying Speed |
setting |
5-30
min |
10-30
min |
60-120
min |
10-30
min |
instant sealing at the low pressure |
2min(adding promotor) |
10-30 |
|
setting time can be adjusted on the clients' different requirements. |
|
reaching the final strength |
24h |
24h |
24h |
24h |
24-72h |
24h |
24h |
|
Sealing Pressure Resistance of Pipe Joint (Mpa) |
40 |
40 |
40 |
micropore sealing pressure resistance 20 |
40 |
|
|
|
Work Temperature,
°C |
-40-+150 |
-40-+100 |
-40-+150 |
|
Medium Resistance |
resistant to acid, alkali, oil, water and Freon, etc. |
|
Packing |
50g/bottle |
150g/tube |
50g/bottle |
|
250g/bottle |
|
250g/bottle |
|
1kg/drum |
|
1kg/drum |
Modle NO. and Use of Anaerobic Adhesive
| Model No. |
Use |
ZY-242 |
medium strength, general type, thixotropy viscosity.
typical use: locking of bolt and nut |
ZY-243 |
medium strength, fast solidifying
used for the locking and sealing of M20 below screw thread
typical use: gasoline box bottom case screw |
ZY-262 |
high strength, suitable for most metal surface; resistant to chemicals.
used for M20 below screw thread locking and sealing
typical use: screw thread locking and sealing of engines. |
ZY-271 |
super-high strength, medium viscosity
used for locking and sealing of M36 below screw thread
typical use: locking of steam cylinder head threaded stud |
ZY-277 |
high strength, high viscosity, good resistance to chemials; suitable for active metal surface.
used for the locking and sealing of M56 below screw thread locking.
typical use: locking and sealing of screw thread |
ZY-609 |
general type, high strength, low viscosity, fast solidifying 。
typical use: used for bearings, rotor spindle, bushing block etc. |
ZY-680 |
general type, high strength, medium viscosity.
typical use: assembly, shaft liner belt strap roller, casing, gear, rotor. |
ZY-908 |
liquid thread seal tape, medium strength, high viscosity
used for the locking and sealing of screw thread with air conditioners, gas pipes, oil pipes and hydraulic pipes etc. |
Specifications o fType ZY-2 and Type ZY-6 and Liquid Thread Seal Tape Anaerobic Adhesive
Modle No. |
ZY－242 |
ZY－243 |
ZY－262 |
ZY－271 |
ZY－277 |
ZY－609 |
ZY－680 |
ZY-908 liquid thread seal tape |
Colors |
blue |
blue |
red |
red |
red |
green |
green |
yellow, green, red |
Max. filling gap(mm) |
0.13 |
0.13 |
0.13 |
0.13 |
0.25 |
<0.13 |
0.1～0.25 |
0.5 |
Viscosity(mPa·s) |
1200 |
2000 |
1900 |
500 |
7000 |
100~150 |
800~1800 |
3000~8000 |
Destabilizing moment (N·m) |
12 |
20 |
21 |
25 |
38 |
32 |
35 |
15 |
Average disassembly moment(N·m) |
4.8 |
7 |
25 |
31 |
32 |
36 |
40 |
10 |
Shear strength after solidifying (N/mm2) |
/ |
/ |
/ |
/ |
/ |
≥19 |
≥21 |
/ |
Working temperature (0C) |
-55~150 |
-55~150 |
-55~150 |
-55~150 |
-55~150 |
-55～150 |
-55～150 |
-55～150 |
Curing rate at room temperature |
Solidify |
20 minute |
20 minute |
20 minute |
20 minute |
20 minute |
10 minute |
10 minute |
20 minute |
Complete Solidify |
24 hour |
24 hour |
24 hour |
24 hour |
24 hour |
24 hour |
24 hour |
24 hour |
Notes:
1. Curing rate is dependent on materials, surface clearness and temperature.
2. Packing: 10g, 50g, 250g/bottle and 1Kg, 20Kg/drum
3. Storage: Closed tight, avoid light, put in cool and draughty place. Shelf life: 1 yrs.(1kg)
4. Transporting: Avoid impact and high pressure; protect against direct sunlight.
|
|
|
|
Anaerobic Adhesive